{text constructed during page load}
2022 John Deere 1025R
This is Getting Noticed! 4 people viewed in last 7 days
$34,200.00
Key Features
New/Used New
Usage0 Hours
Availability
In Stock
LocationRL Equipment Sales & Services Ltd.
Primary ColorR4 SINGLE POINT LOADER
Stock #
RVNP854778
VIN
1LV1025RVNP854778
Condition
Excellent
Bar Length0.0
Blade Length0.0
Cutting Width0.0
Horsepower0.0
Product Features
Dealer Notes
*SHOWN WITH OPTIONAL IMPLEMENTS
Description
Key Features
- Powerful Tier 4-compliant diesel engine
- Premium Operator Station with ergonomic seat, armrests and fender lights
- AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes
Features
- Spend more time working and less time switching equipment with easy implement swaps
- Quickly and easily change speed and directions with Twin Touch foot controls and Hydrostatic transmission (HST)
- Excellent maneuverability and easy operation with standard four-wheel drive (4WD) and power steering
- Comfortable and convenient open operator's station
- Get year-round performance with the optional cab
- Flexibility in operation with multiple mid-mower lift system options
Key Specs
- Engine power (gross): SAE J1995 rated power: 17.8 kW / 23.9 hp / 24.2 PS at 3200 rpm
- Power take-off (PTO) power: 12.8 kW / 17.2 hp
- Steering hydraulics: 13.2 L/min / 3.5 gpm
- Implement hydraulics: 13.2 L/min / 3.5 gpm
- Hitch type: Limited Category 1
- Lift capacity, 24-in. behind link arms: 344 kg / 758 lb.
- Standard transmission; forward/reverse: Hydrostatic - two range
- Cruise control: Standard
- Approximate shipping weight (open-station; cab): Open station: 706 kg / 1556 lb. / Cab: 906 kg / 1996 lb.
- Wheelbase: 1450 mm / 57.1 in.
Engine
- Manufacturer: Yanmar®
- Engine model: 3TNV80F-NCJT
- Engine power (gross): SAE J1995 rated power: 17.8 kW / 23.9 hp / 24.2 PS at 3200 seconds
- Power take-off (PTO) power: 12.8 kW / 17.2 hp
- Rated engine speed: 3200 rpm
- Type: Diesel
- Injection pump type: Indirect injection
- Aspiration: Natural
- Emissions compliance: Final Tier 4
- Cylinders/displacement: Three cylinders: 1.267 L / 77.3 cu in.
- Number of cylinders: Three
- Cylinder liners: Cast-in-block
- Bore and stroke: 80 x 84 mm / 3.15 x 3.31 in.
- Compression ratio: 23.1:1
- Lubrication: Pressurized
- Cooling system: Water pump
- Air cleaner: Dual element with mechanical restriction indicator
- Engine torque at rated speed: 53.1 Nm / 39.2 lb.-ft
- Fuel tank capacity: 24 L / 6.3 U.S. gal.
Electrical
- Battery size: 500 CCA
- Alternator (12-V): 40 amp
- Starter size: 1.2 kW / 1.6 hp
Fuel System
- Type: Indirect injection
Transmission
- Standard transmission; forward/reverse: Hydrostatic - two range
- Left-hand reverser: No
- Final drive: Spur gear
- Brakes: Wet disc (left-hand pedal)
- Steering: Power
- Axle capacity: Front / 612 kg / 1349 lb. / Rear / 715 kg / 1576 lb.
- Creeper: No
- Cruise control: Standard
- Differential lock: Yes
Hydraulics
- Type: Open center
- Pump rated output: Steering / 13.2 L/min / 3.5 gpm / Implement / 13.2 L/min / 3.5 gpm / 24 L/min / 6.3 gpm
- Pump type: Single gear
- Maximum operating pressure: 138 bar / 2000 psi
- Draft control sensing: Position control
- Remote control valves available: Three
3-Point Hitch
- Type: Limited Category 1
- Lift capacity, 24-in. behind link arms: 344 kg / 758 lb.
Power Take-Off (PTO)
- Standard: Rear: 540 rpm / Mid: 2100 rpm
- Control: Independent
- Clutch: Wet disk
- Brake (for mid and rear PTO): Wet disk
Fluid Capacities
- Crankcase with filter: 2.7 L / 2.9 qt
- Transmission and hydraulic system: 12.3 L / 3.2 gal.
Final Drive
- Type: Spur gear
- Differential lock: Yes
Operator Station
- Rollover protective structure: Type / Foldable / Yes
- Platform - flat/straddle: One-piece semi flat
- Gear shift location - console/floor: Left-hand side
Cab
- Air conditioning, temperature differential: Heat only
- Doors: Two
- Seat equipment: Premium seat
Dimensions
- Wheelbase: 1450 mm / 57.1 in.
- Front axle clearance: 195 mm / 7.7 in.
- Turning radius without brakes: Outside front tire: 2.51 m / 8.2 ft
- Limited slip differential: No
- Approximate shipping weight (open-station; cab): Open station: 706 kg / 1556 lb. / Cab: 906 kg / 1996 lb.
Tires
- Front: R3 Turf: 18x8.50-10 / R3 Turf Radial: 18x8.50-10 / R4: 18x8.5-10
- Rear: R3 Turf: 26x12-12 / R4: 26x12-12
- Front tread range: 931 mm / 36.7 in.
- Rear tread spacing: 895 mm / 35.2 in.
Miscellaneous
- Toolbox: Yes
NOTES:
*Manufacturer's suggested price. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less. Offers valid in the United States. Prices in U.S. dollars.Engine
Engine Manufacturer | Yanmar® |
Engine Type | 3TNV80F-NCJT |
Horsepower | SAE J1995 rated power: 17.8 kW (23.9 hp) |
PTO HP | 12.8 kW (17.2 hp) |
Rated RPM | 3200 rpm |
Bore and Stroke | 80 x 84 mm (3.15 x 3.31 in.) |
Specifications
Wheelbase | 1450 mm (57.1 in.) |
Weight | Open station: 706 kg (1556 lb.); Cab: 906 kg (1996 lb.) |
Ground Clearance | 195 mm (7.7 in.) |
Tire Size | Front: R3 Turf: 18x8.50-10 / R3 Turf Radial: 18x8.50-10 / R4: 18x8.5-10; Rear: R3 Turf: 26x12-12 (R4: 26x12-12) |
General
Fuel System | Indirect injection |
Fuel Capacity | 24 L (6.3 U.S. gal.) |
Transmission | Hydrostatic - two range |
Brakes | Wet disc (left-hand pedal) |
Hydraulics | Open center |